WinDOwS Tricks - Part 12

Go to ALL WinDOwS ©Tricks + Secrets Contents

1. Removable drives [Windows 98/ME ONLY]: uncheck the "Enable write-behind caching on all removable disk drives" box, click OK/Apply twice, and finally restart Windows (which you will be prompted to do anyway).

2. Fixed (hard) drives [ALL Windows 9x/ME releases]: run Regedit and go to:
   HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\FileSystem
   In the right hand pane look for the "DriveWriteBehind" Binary value.
   It should read something like:
   01 00 00 00
   meaning write behind is enabled on drive C, or:
   00 00 00 80
   meaning write behind is enabled on drives/partitions C, D, E and F (in my case).
   To completely disable write behind on ALL your fixed local/network drives, double-click on "DriveWriteBehind", and change its value to read (don't type the spaces):
   00 00 00 00
   To enable write behind on ALL local/remote drives (C to Z), change it to:
   FF FF FF 03
   Close the Registry Editor and restart Windows when done.
   If write behind cache is disabled, overall system performance will decrease slightly, depending mainly on your CPU, RAM and hard disk subsystem speed, but it will allow you to "play safe".
   If you are the lucky owner of an Uninterruptible Power Supply (UPS) unit, turning off write behind cache becomes obsolete.

• Windows 98 retail owners: Install the Microsoft Libraries Updates + OLE Update.

• ALL Windows 9x/ME owners: Install Microsoft Internet Explorer 5.5 SP2 [Win95/OSR1/OSR2] or 6.0 SP1 [Win98/ME]. MS IE 5/6 upgrades all these libraries during Setup.

• Windows 95/OSR1/OSR2 owners who chose NOT to upgrade to MS IE 5.5 SP2 need to download + install the separate Microsoft MFC Libraries.

1. If you use any 32-bit Internet application (i.e. web browser), you need to install the free Microsoft Internet Interoperability APIs (DCOM), which also update the OLE Automation Libraries for better compatibility:
   • Windows 98/98 SE owners: download + install DCOM98 1.3.
   • Windows 95/OSR1/OSR2 owners: download + install DCOM95 1.3.

2. If you own Windows 9x/ME or use ANY Windows applications written in or using JScript or/and VBScript, like Microsoft or Netscape 32-bit web browsers, you need to install the free Microsoft Scripting Engines (MSE) v5.6 Updates for Windows 9x/NT4/2000/ME/XP/2003, which include: VBScript 5.6, JScript 5.6, Windows Script Components, Windows Script Host 5.6 + Windows Script Runtime 5.6.

3. It is also recommended to install the free Microsoft Visual Basic 3.0 (VB3), 4.0 (VB4), 5.0 (VB5) and 6.0 (VB6) SP5 Runtime Libraries for Windows 3.xx/9x/NT/2000/ME/XP/2003, if using ANY Windows applications written in Visual Basic (VB).

1. Copy SYSTEM.DAT, USER.DAT (all Win95/98/ME releases) + CLASSES.DAT (WinME only) to a safe location, such as a BACKUP disk (removable media): cartridge, optical, (re)writable CD/DVD, tape, USB/FireWire stick, external HD etc.
   NOTE: Registry files are usually too large to fit on a single 1.44 MB floppy diskette, therefore you need to use any other larger media to back them up!
   1. Create a DOS batch file called REGBAKUP.BAT (using Notepad) containing these lines (example):
      @ECHO OFF
      IF NOT EXIST E:\REGBAKUP\NUL MD E:\REGBAKUP
      ATTRIB -H -R -S +A %winbootdir%\*.DAT
      IF EXIST E:\REGBAKUP\*.DA2 COPY/Y E:\REGBAKUP\*.DA2 E:\REGBAKUP\*.DA3
      IF EXIST E:\REGBAKUP\*.DA1 COPY/Y E:\REGBAKUP\*.DA1 E:\REGBAKUP\*.DA2
      IF EXIST E:\REGBAKUP\*.DAT COPY/Y E:\REGBAKUP\*.DAT E:\REGBAKUP\*.DA1
      COPY/Y %winbootdir%\SYSTEM.DAT E:\REGBAKUP
      COPY/Y %winbootdir%\USER.DAT E:\REGBAKUP
      IF EXIST %winbootdir%\CLASSES.DAT COPY/Y %winbootdir%\CLASSES.DAT E:\REGBAKUP
      EXIT
      presuming E is a removable backup drive. Change the paths to match your system setup.
      Note that REGBAKUP.BAT creates up to 4 different copies of your Win9x/ME Registry files if run more than once: *.DAT (newest = default extension), *.DA1 (second to newest), *.DA2 (second to oldest) and *.DA3 (oldest).
      In case of system lockups/errors/etc due to a corrupted Registry, you can restore your working (good) Registry files from the most recent backup by copying the *.DAT files from E:\REGBAKUP back to your Windows folder, overwriting the ones already there.
      In case your E:\REGBAKUP\*.DAT files are also corrupted, rename the *.DA1 files to *.DAT and then copy them to your Windows folder, over the old ones.
      Same procedure applies if the E:\REGBAKUP\*.DA1 files are corrupted: rename the *.DA2 files to *.DAT and then copy them to your Windows folder etc...
      You can also modify REGBAKUP.BAT to create more than 4 backups in the same manner: copy *.DA3 as *.DA4, *.DA4 as *.DA5 etc...

   2. Create a shortcut (.PIF file) to REGBAKUP.BAT in the Startup folder (C:\Windows\Start Menu\Programs\Startup), to backup the Registry files automatically (in the background) every time Win95/OSR1/OSR2 loads.
      Win98/ME does this automatically upon the first load of each day. See "SCANREGW, SCANREG + SCANREG.INI", also in TIPS98.TXT [part of W95-11D.EXE], for Win98/ME Registry backup details!

2. To BACKUP the ENTIRE Registry to a .REG file (which is a plain text/ASCII file) from WITHIN Windows:
   1. Run the Registry editor (Regedit.exe).
   2. Highlight "My Computer" main tree.
   3. Click on the "Registry" menu item.
   4. Select "Export Registry File...".
   5. Type REGBAKUP.REG (or whatever filename you wish, just keep the .REG extension) in the "File name" field.
   6. Browse to the drive and folder where you want REGBAKUP.REG to reside.
   7. Click the Save button.
      Then you can open REGBAKUP.REG in a text editor, if you would like to make any changes.
      You canNOT use Notepad, because it is limited to a maximum file size of only 64 KB. Bummer... :(
      NEVER use ANY word processor like Wordpad, MS Word (MS Office), AbiWord, OpenOffice or similar to edit .REG files!
      ALWAYS use a plain text/ASCII editor (better Notepad replacement) that can handle large text files [free(ware)].

3. You can also EXPORT the ENTIRE Registry or only the keys/subkeys of your choice to a .REG file, ONLY from the native MS-DOS mode, using this REGEDIT command (example):
   REGEDIT /E E:\REGBAKUP\REGBAKUP.REG
   presuming E is a removable backup drive. Change the paths to match your system setup.
   This exports the ENTIRE Registry to REGBAKUP.REG.

1. To RESTORE the Registry files (i.e. after a system crash), FIRST exit Windows (or reboot) to the native/real/true/pure MS-DOS mode.
   IMPORTANT:
   • To learn more about these issues, READ these topics [also part of W95-11D.EXE]:
     • For details on how to boot to the native MS-DOS prompt, read "COMPLETE MSDOS.SYS REFERENCE", also in MYTIPS95.TXT.
     • For details on how to exit Windows 9x to MS-DOS, read "EXIT TO DOS", also in TIPS95.TXT.
     • For details on more MS-DOS boot options, read "2 DOS OR NOT 2 DOS", also in MYTIPS95.TXT.
     • For details on how to PROPERLY recreate (compact/shrink) your Registry from an exported .REG file in Windows 9x, read "SHRINK THE REGISTRY!", also in MYTIPS95.TXT.
   • Download the FIXed REGEDIT.EXE [53 KB, freeware] for ALL Win95/OSR1/OSR2/98 releases (NOT WinME!) to properly recreate/import into the Registry from REG files.
   • Alternatively you can download the patched WinME REGEDIT.EXE which also fixed the Win9x .REG file recreate/import bug.
   • See FixReg [57 KB, freeware] to learn how to FIX Windows 95/98 exported Registry recreation/import BUGs.
   1. Create a Registry BACKUP using REGBAKUP.BAT, as explained in the "HOW TO BACKUP/EXPORT YOUR REGISTRY *FIRST*!" topic (paragraph A) further above.

   2. Create a DOS batch file (using Notepad) called REGRESTR.BAT, or whatever else you want (but keep the .BAT extension), containing these lines (example):
      @ECHO OFF
      MEM /C | FIND /I "vmm32">NUL
      IF NOT ERRORLEVEL 1 GOTO END
      ATTRIB -H -R -S +A %winbootdir%\*.DAT
      IF EXIST %winbootdir%\*.DA0 ATTRIB -H -R -S +A %winbootdir%\*.DA0
      IF EXIST %winbootdir%\*.BAD ATTRIB -H -R -S +A %winbootdir%\*.BAD
      IF EXIST %winbootdir%\*.BAD DEL %winbootdir%\*.BAD
      REN %winbootdir%\SYSTEM.DAT SYSTEM.BAD
      REN %winbootdir%\USER.DAT USER.BAD
      IF EXIST %winbootdir%\CLASSES.DAT REN %winbootdir%\CLASSES.DAT CLASSES.BAD
      IF EXIST %winbootdir%\*.DA0 DEL %winbootdir%\*.DA0
      IF EXIST E:\REGBAKUP\*.DAT COPY/Y E:\REGBAKUP\*.DAT %winbootdir%
      :END
      EXIT
      presuming E is a removable backup drive. Change the paths to match your system setup.
      The newest E:\REGBAKUP\*.DAT Registry backup files are copied back to your Windows folder, and the corrupted *.DAT files from your Windows folder are renamed to *.BAD (which you can delete later). Now (re)start Windows by running WIN.
      If your newest *.DAT backup files are also corrupted, follow the steps outlined in "HOW TO BACKUP/EXPORT YOUR REGISTRY *FIRST*!" paragraph A (further above) to restore your Registry from an older (good) backup.

   3. Place REGRESTR.BAT in a folder in your path, specified on your AUTOEXEC.BAT or CONFIG.SYS PATH line.

   4. Run REGRESTR.BAT ONLY from the native MS-DOS prompt, every time after you have been locked out of Windows, or experience sudden errors, and you KNOW this happened because of CHANGES (you or a buggy program/driver/etc) made to your Registry.

2. To IMPORT a .REG file (back) into the Registry from WITHIN Windows:
   1. Run the Registry editor (Regedit.exe).
   2. Click on the "Registry" menu item.
   3. Select "Import Registry File...".
   4. Browse to the drive and folder where your .REG file resides.
   5. Double-click on it, or click the Open button.
   6. Answer OK to the confirmation prompt.

3. To IMPORT a .REG file (back) into the Registry, ONLY in native/real/true/pure MS-DOS mode OUTSIDE Windows, use this REGEDIT command (example):
   REGEDIT E:\REGBAKUP\REGBAKUP.REG
   presuming E is a removable backup drive. Change the paths to match your system setup.
   To see all available REGEDIT parameters, run:
   REGEDIT
   ONLY from the native MS-DOS prompt.

4. To (RE)CREATE the Registry from scratch using a .REG file that contains your ENTIRE Registry, ONLY in native/real/true/pure MS-DOS mode OUTSIDE Windows, use this REGEDIT command (example):
   REGEDIT /C E:\REGBAKUP\REGBAKUP.REG
   presuming E is a removable backup drive. Change the paths to match your system setup.
   To see all available REGEDIT parameters, run:
   REGEDIT
   ONLY from the native MS-DOS prompt.

5. To MERGE (register) a .REG file (back) into the Registry from WITHIN Windows:
   1. Start Windows Explorer or File Manager (FM = %windir%\WINFILE.EXE).
   2. Browse to the .REG file you want to merge.
   3. (Double)-click on it.
   4. Click Yes to proceed.
   5. Answer OK to the confirmation prompt.

• How to Backup, Edit and Restore the Registry in Windows 95, 98 and ME.
• How to Backup the Registry in Windows 95.
• How to Backup the Registry in Windows 98 and ME.
• How to Backup and Restore Your Registry in Windows 95 & 98.
• How to Backup and Restore Your Registry in Windows 98.
• Rescue v2 (freeware).
• COP Windows 9x Registry and System File Management Utility (freeware).
• "FREE WINDOWS 9x/NT/2000/ME/XP/2003/Vista/2008 SYSTEM + REGISTRY FIXERS", also in SOFTWARE.TXT (part of W95-11D.EXE).

• Can be used for storing ALL browser cache AND cookie files.
• Cuts down on hard disk activity noticeably.
• Provides much greater file storage efficiency, because a RAM drive uses 512 Byte size clusters, smaller even than the FAT32 file system (limited to a minimum of 1 KB default cluster size, on drives/partitions smaller than 512 MB).
• Avoids cluttering your hard disks with zillions of small temporary files.
• Cached web sites are accessed a lot faster.
• Windows GUI provides full 32-bit driver support for RAM drives.

• By using Microsoft's DOS mode RAMDRIVE.SYS your CD/DVD drive letter will be shifted upwards by 1 letter. Example: if you have 1 hard drive (single partition) and 1 CD/DVD drive, the RAM drive will take letter D, and will shift the CD/DVD drive to letter E, in both DOS and Windows modes. Therefore you will need to update ALL your CD/DVD based applications/links to point to the new letter!
• MS RAMDRIVE.SYS can create a RAM disk of only 32 MB maximum size.
  See XMS/EMS RAMdisk further below for a better RAM Drive replacement: maximum RAM disk size 2 GB!
• The ENTIRE contents of a RAM drive is GONE upon rebooting!
• You need at least 32 MB of memory (RAM) installed in your computer (64 MB recommended) to use this trick!
• WARNINGS:
  • If using Microsoft Internet Explorer 3/4/5/6 you will NOT be able to download files larger than the RAM disk size, because MS IE downloads ALL files from the Internet into its cache (TIF) folders! Therefore you need to create a dedicated DOS batch file [HINT: using for example the MS-DOS XCOPY command for this job] to copy all cached files from the RAM disk to your local hard disk, and eventually delete them all afterwards [HINT: using the MS-DOS DELTREE/Y command] from your RAM drive, to make more room for further downloads, BEFORE shutting down or rebooting Windows.
  • If you decide to relocate your Windows OS TEMP(orary) folder (governed by the TEMP and TMP environment variables = see futher below for details) to a RAM drive, you will NOT be able to install ANY program/game/update using file(s) LARGER than your RAM disk free space!

1. Get XMS/EMS RAMdisk 16-bit DOS TSR improved Microsoft RAMDRIVE.SYS replacement for MS-DOS 5/6 and Windows 3.1x/9x/ME [74 KB, freeware], or XMS/EMS RAMdisk with installer/uninstaller for Windows 9x/ME [114 KB, freeware].
   Install and configure XMS/EMS RAMdisk to load every time with Windows.
   Do NOT reboot yet. Skip to paragraph 3 below to learn how to change the location of your web browser(s) cache/cookie folders to point to the RAM drive.
   If using MS RAMDRIVE.SYS: add this line (example) to your CONFIG.SYS file to create a new temporary drive in your computer's memory (RAM):
   DEVICEHIGH=C:\WINDOWS\RAMDRIVE.SYS 4096 /E
   This creates a new 4 MB RAM drive in extended memory, but you can specify a different size (in KiloBytes), depending on the desired cache folder size, and your installed RAM.
   To load RAMDRIVE.SYS in the Upper Memory Area (UMA), you need to use an upper/extended/expanded memory manager in CONFIG.SYS, like EMM386.EXE (bundled with Windows 9x/ME), with the NOEMS (to enable extended memory only) or RAM (to also enable expanded memory) switch. Example:
   DEVICE=C:\WINDOWS\EMM386.EXE I=C800-EFFF I=B000-B7FF RAM D=256 AUTO
   TIP: See my "Complete UMBPCI.SYS Guide", to learn how to use a better and faster (freeware) memory manager (provides ONLY upper, NOT expanded memory) in your CONFIG.SYS, in order to load XMSDSK.EXE or RAMDRIVE.SYS in the UMBs, thus saving conventional RAM.
   Change the Windows folder name if different on your system.

2. Create a new temporary directory on the RAM drive to store all browser cache/cookie files, by adding this line to your AUTOEXEC.BAT file (example):
   MD D:\TEMP
   presuming you have only 1 hard disk/partition and 1 CD-ROM drive. Change this letter if you have more drives to the next available letter AFTER the last letter taken by your hard disks/partitions, and BEFORE the CD-ROM drive letter.
   DO NOT allow your browser to use the root directory on the RAM drive as its cache folder, because the RAMDRIVE.SYS root directory can ONLY hold up to 512 files, because it uses the obsolete FAT12 (used on floppy disks) as its default File System!
   FYI: FAT16 also supports ONLY maximum 512 root entries, and newer FAT32 allows unlimited root entries.

3. Modify your web browser settings to point to the new cache/cookie folder:
   1. Netscape Navigator/Communicator 4.xx: click Edit -> Preferences -> double-click Advanced -> select Cache -> adjust the "Disk Cache Folder" to point to the directory you created on the RAM drive, then adjust the "Disk Cache" to match the size of the RAM drive -> click OK.
      Netscape/Mozilla 4.xx/6.xx/7.xx browsers use the \Netscape\Users\Your_Email_Name folder (default) for storing cookies. But you can change the COOKIES.TXT file location to the drive/partition + folder of your choice, thanks to Tom:
      "Open Start Menu -> Netscape -> Utilities -> User Profile Manager -> create a NEW profile -> enter the disk + folder location when requested -> browse to your RAM disk drive letter and select the TEMP directory (example).
      From now on your ENTIRE profile (including COOKIES.TXT) will go there."
      IMPORTANT: The downside is that you need to SAVE this entire folder contents to your hard disk EVERY TIME BEFORE shutting down or rebooting your PC (eventually using a dedicated DOS batch file shortcut), otherwise it will be wiped out. :(
      For this purpose, use Notepad to create a file with the .BAT extension for complete automation, using E as RAM drive, E:\TEMP as new profile location and C:\TEMP as hard drive destination folder for saving and restoring your profile every time before opening your browser and after closing it, and including a command line for starting Netscape.exe in between (example):
      @ECHO OFF
      XCOPY /E/H/I/R/Y C:\TEMP E:\TEMP
      START/W NETSCAPE.EXE
      XCOPY /E/H/I/R/Y E:\TEMP C:\TEMP
      EXIT
      If any of these drive letters and/or folder names are different on your system, change them accordingly.
      Last step is to create a shortcut for this BAT file into the Start Menu folder of your choice, and from now on just run Netscape from this new shortcut. Make sure your MS-DOS PIF (Program Information File) shortcut is set to close at the end: right-click on it -> select Properties -> Program tab -> check the "Close on exit" box -> click OK -> done. :)
      UPDATE: "There is no Preferences option to move the Netscape 6.xx/7.xx, Mozilla Gecko or Firefox Cache folder location to a RAM (or any other) drive and/or directory.
      But you can achieve this without creating a new profile on your new target (RAM) drive and then copying this profile to and from the RAM disk every time you restart the computer.
      Just open the Prefs.js file (located in %windir%\Application Data\Mozilla\Profiles\UserName\xxxxxxxx.slt = replace UserName with your actual user name) in Notepad and modify this line to whatever you wish:

      user_pref("browser.cache.disk.parent_directory", "X:\\Cache");

      Replace X with your desired drive/partition letter and Cache with your folder name (long file names are accepted).
      Save your work and exit Notepad.
      FYI: This tweak is found at Mozilla.org.
      [Thank you Biolex!]

   2. Microsoft Internet Explorer 4/5/6: click Tools -> Internet Options/Properties -> click the Settings button in the "Temporary Internet Files" area -> click the "Move folder" button -> browse to and select the directory you created on the RAM drive, then "Adjust the amount of disk space to use" to match the size of the RAM drive -> click Apply/OK.
      In case MS IE won't allow moving its cache folder from the Internet Properties applet, you can still force it to do so by merging the IECACH9X.REG REG file [9 KB, ZIPped; use one of these "Free Windows 9x/NT4/2000/ME/XP/2003/Vista/2008/7 File Shrinkers" to extract the files] into your Registry by (double)-clicking on it in Windows Explorer or File Manager (FM = C:\WINDOWS\WINFILE.EXE), but BACKUP YOUR REGISTRY FIRST!
   IECACH9X.REG contains also the necessary Registry keys for redirecting IE's Cookies, History, URL History and Favorites folders to the TEMP directory on your RAM disk. This is cool if you have no use for them, and would prefer to "clean up" your hard disk(s) a bit, like I do. :)
   Some of these key names may differ slightly depending on your MS IE built, like the "5.0" Cache keys that are used only by IE 5.xx/6.xx.
   Open IECACH9X.REG in Notepad and replace the RAM drive letter (E in this example) if different on your computer.

4. OPTIONAL: Redirect your TEMPorary folders location to the RAM disk by adding/changing these lines in your CONFIG.SYS file (located in C:\ root) with Notepad/Sysedit:
   SET TEMP=E:\TEMP
   SET TMP=E:\TEMP
   IMPORTANT: Microsoft acknowledged that RAMDRIVE.SYS canNOT be used in Windows ME because real DOS mode [and CONFIG.SYS] has been removed.
   Therefore Windows ME users MUST apply one of these Unofficial DOS Patches, which modifies COMMAND.COM + IO.SYS (from C:\Windows\Command\EBD) + REGENV32.EXE (from C:\Windows\System), in order to be able to boot to native MS-DOS and use DOS mode startup files (AUTOEXEC.BAT + CONFIG.SYS), Windows 95/98 style.

5. Reboot.

6. Done. :)

46080 = RAM disk size in KB.
E: = desired drive letter.
/C1 = cluster size set to 512 Bytes. /C2 = 1024, /C4 = 2048 (ONLY doubling works: 2, 4, 8 etc, NOT 3, 5, 7 etc).
/T = use extended (XMS) RAM from top in a contiguous block: A MUST!
IMPORTANT: /T MUST be used with ANY 16 MB or larger RAM disk, otherwise Windows 95/98/ME does NOT properly initialize IOS (Input Output Subsystem) [RMM (Real Mode Mapper) fails to load], and as a consequence LFNs (Long File Names) support will be DISABLED on the RAM disk.
/Y = to disable the confirmation prompt for uninterrupted operation.

1. Get one of these freeware RAM Disk Drivers for Windows NT4/2000/XP/2003.

2. To install AR RAM Disk [248 KB]: log on as Administrator/Power User -> run ARRAMDSK.EXE -> do NOT reboot yet!

3. (Double)-click on IECACHXP.REG [9 KB, ZIPped; use one of these "Free Windows 9x/NT4/2000/ME/XP/2003/Vista/2008/7 File Shrinkers" to extract the files] to move all MS IE temp folders to the newly created RAM disk: E:\TEMP used here, change if necessary to match your particular settings.

4. OPTIONAL: The extra lines at the bottom of IECACHXP.REG relocate all TEMPorary files created by the OS to the RAM disk E:\TEMP target directory.
   Open IECACHXP.REG in Notepad and change the drive letter and/or folder name to match your particular/desired settings, or REMark (disable) them by preceding each line with a semicolon (;), if you don't want to move the TEMP and TMP folders to the RAM drive.
   Note that the RAM disk will occupy the next available letter after the last local drive/partition already installed in your system, excluding eventual network/remote drives, which are usually positioned towards the end of the alphabet (e.g. M-Z). In case your network drives follow immediately after the local drive letters, you need to count them all in.
   To find out your RAM disk drive letter, open Windows Explorer, scroll down to the last (local) drive/partition letter and add 1 to it.
   When done, run IECACHXP.REG to relocate all MS IE 4/5/6 Cache, Cookies, Favorites and History folders to the newly created RAM drive.
   If you don't want to move your Favorites folder to the RAM disk, open the REG file in Notepad, and REMark (disable) all "Favorites" lines from IECACHXP.REG by preceding each of them with a semicolon (;).

5. Customize your RAM drive size following the same rules as described above (try not to go over 1/4 of your total installed PC memory) by using the included Control Panel applet (if using AR RAM Disk) or your newly created RAM Disk Properties right-click menu (if using RAMDisk).

6. See paragraphs 3A & 3B under the "WINDOWS 95/98/ME:" subtitle above to find out how to change the location of Cache and Cookies folders in Microsoft and Netscape browsers without modifying the Registry.

7. If all your hard drives/partitions are using NTFS and/or you have no floppy drives attached to your (portable) computer, Windows 2000/XP/2003 may not load the FastFAT driver. :( In this case you need to fire up Regedit and go to:
   HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Fastfat
   In the right hand pane double-click on the "Start" DWORD [REG_DWORD] Value -> modify its Data value to read 1 -> exit the Registry Editor.

8. Reboot.

9. Done. :)

• Using a RAM drive.
• Setting Up a RAM Drive in Windows 9x/ME.
• Windows 2000 RAMDISK Guide.
• Manage temporary files to minimize file fragmentation.
• Ram Disks.
• XP RAM drive.
• Gavotte Ramdisk with GUI also here (freeware).

1. Reboot.
2. Press F8 during the BIOS POST routine, while the bootup messages appear on screen. This restarts your machine in "Safe Mode".
3. When the Windows 9x GUI has completed loading, right-click on your My Computer icon -> select Properties -> click the Device Manager tab.
4. Expand each device menu one at a time.
5. Skip the FIRST item in each category, and then DELETE ALL others with identical or similar names, EXCEPT if you have more than one device of same type (i.e. more than one floppy/hard drives, 2D/3D video adapters etc).
6. Reboot again in "Normal Mode". [Don't touch that dial! :)]
7. Now watch for any messages like:
   "New Hardware found"
   "Windows has found a new device and is installing software for it"
   "Please insert installation disk #1"
   Follow the instructions to reinstall your hardware if necessary, inserting your vendor provided driver cd-rom/floppies, or pointing to the drive and folder where your drivers reside. Then restart Windows when prompted to do so.
8. Run Regedit.exe -> click the Registry item -> select "Export Registry file..." -> browse to C:\ root, type NEW.REG in the "File name:" box, and finally click OK or press Enter, to export your entire Registry to NEW.REG (or call it whatever you want, just keep the REG extension).
9. Download FixReg [57 KB, freeware].
10. Run FixReg (ONLY from Windows!) to FIX eventual Registry errors.
11. Exit Windows again to the native MS-DOS mode, and run:
    REGEDIT /C C:\NEW.REG
    to compact (shrink) the FIXED Registry.
12. Restart Windows by typing:
    EXIT
    and then pressing Enter.
13. Defragment ALL your hard drives/partitions, and if you have Windows 98, enable the "Rearrange program files so my programs start faster" option.
14. Done.

1. Read "COMPLETE MSDOS.SYS REFERENCE", also in MYTIPS95.TXT [part of W95-11D.EXE], for more details on bootup options.
2. Read "SHRINK THE REGISTRY!", also in MYTIPS95.TXT [part of W95-11D.EXE], for more details on how to PROPERLY compact (shrink) your Registry.

"There are a few little other tweaks for file viewers:
1. If one uses an enhanced viewing program, such as Quick View Plus, the viewer will default to the Plus program which is already on the FILE and Right Click menus. [A search of the Registry shows "Quick View Plus" has taken over the original "QuickView" key and the latter is now relegated to a key named "QuickView.Original".]
2. "Quick View" will not appear on the File or Right Click menus for non-extensioned files such as the ones named "axcel216" or "ojatex" in the Organize sub-folder of the AOL program. However, Quick View Plus will appear in those menus. One can make Quick View appear in the Right Click menus if one uses a program such as "Mlaunch.dll" by adding "QuikView.exe" via the Properties Tab.
   {Note: Any AOL screen name longer than eight characters [10 is the max], has a period placed after the eighth character in the file directory, which gives the file an "extension".}
3. When one tries to open a file such as "axcel216" or "ojatex" with Quick View Plus it seems to work fine unless that file has become quite large [since the owner has not cleaned out their AOL Personal File Cabinet in a long time -- I'm taking the 5th on this one]. At some point of "largeness", apparently Quick View Plus balks and returns a "Whoops" message. But there is a workaround for this too [we won't have to clean up just yet]. One can open these files with a word processing program - they won't look as nice as the Quick View rendition, but the files are viewable."

1. First, make sure to close ALL IE browser windows.

2. Even if you have already installed a "branded" copy of IE5, you can always reinstall it. Open the folder IE5's installation files reside into, and move the Branding.cab file to another location. Now download Microsoft's original Branding.cab for [right-click to save!]:
   • MS IE 5.x [10 KB, free].
   • MS IE 6.0 [8 KB, free].
   Place it into your IE Setup folder. Reinstall IE. No need to uninstall it beforehand, ONLY IF you first installed the current version: IE5 Public Release 32-bit for Windows 9x/NT4 (Intel platforms), build 5.00.2314.1000 (second "silent" release), BUG fixed. To tell exactly your IE vesion/build, open your IE folder and right-click on Iexplore.exe. Select Properties and click the Version tab.

3. To revert IE's title to its original, run Regedit.exe and go to:
   HKEY_LOCAL_MACHINE\Software\Microsoft\Internet Explorer\Main
   and to:
   HKEY_USERS\.Default\Software\Microsoft\Internet Explorer\Main
   Look in the right hand pane for the "Window Title" String Value. You can either modify it to show the original name (Microsoft Internet Explorer), customize it to your heart's content, or simply delete it.

4. To get back the MS IE spinning (globe) logo, run Regedit.exe and go to:
   HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\Toolbar
   In the right hand pane: double-click on the "BrandBitmap" String and delete its value, or delete the entire "BrandBitmap" String. Do the same with "SmBrandBitmap".

5. Alternative method without modifying the Registry: click the Start button -> Run... box -> type the command line below -> click OK or hit Enter:
   rundll32.exe iedkcs32.dll,Clear

6. Restart IE. Voila! The original title and logo have been restored. :)

AUTOEXEC.BAT    ->      Win9x/OSR2 file
CONFIG.SYS      ->      Win9x/OSR2 file
AUTOEXEC.DOS    ->      MS-DOS 6.xx file
CONFIG.DOS      ->      MS-DOS 6.xx file

AUTOEXEC.BAT    ->      MS-DOS 6.xx file
CONFIG.SYS      ->      MS-DOS 6.xx file
AUTOEXEC.W40    ->      Win9x/OSR2 file
CONFIG.W40      ->      Win9x/OSR2 file

• "COMPLETE MSDOS.SYS REFERENCE", also in MYTIPS95.TXT;
• "DUAL BOOT" in MYTIPS95.TXT;
• "DUAL-BOOT IN OSR2/WIN98", also in OSR2TIPS.TXT.